NSE8_812 Study Plan, Valid NSE8_812 Exam Prep

Blog Article

Tags: NSE8_812 Study Plan, Valid NSE8_812 Exam Prep, Reliable NSE8_812 Test Dumps, NSE8_812 Exam Dumps Demo, Exam NSE8_812 Questions Fee

Fortinet NSE8_812 practice exam support team cooperates with users to tie up any issues with the correct equipment. If Fortinet NSE8_812 certification exam material changes, ValidVCE also issues updates free of charge for 1 year following the purchase of our NSE8_812 Exam Questions.

Fortinet NSE8_812 is a certification exam that validates the knowledge and skills of networking professionals in designing, deploying, configuring, and maintaining advanced security solutions using Fortinet security products. Fortinet NSE 8 - Written Exam (NSE8_812) certification exam is designed for experienced network security professionals who have a deep understanding of the Fortinet security solutions and possess advanced level knowledge of network architecture and security protocols.

>> NSE8_812 Study Plan <<

Valid NSE8_812 Exam Prep & Reliable NSE8_812 Test Dumps

Our website can offer you the latest Fortinet pass guide and learning materials, which enable you pass NSE8_812 valid exam at your first attempt. Besides, there are NSE8_812 free braindumps that you can download to learn about our products. Once you decide to buy our test answers, you will be allowed to free update your NSE8_812 Top Dumps one-year.

Fortinet NSE 8 - Written Exam (NSE8_812) Sample Questions (Q102-Q107):

NEW QUESTION # 102
Refer to the exhibits.

A customer wants to deploy 12 FortiAP 431F devices on high density conference center, but they do not currently have any PoE switches to connect them to. They want to be able to run them at full power while having network redundancy From the FortiSwitch models and sample retail prices shown in the exhibit, which build of materials would have the lowest cost, while fulfilling the customer's requirements?

A. 1x FortiSwitch 248EFPOE
B. 2x FortiSwitch 224E-POE
C. 2x FortiSwitch 248E-FPOE
D. 2x FortiSwitch 124E-FPOE

Answer: C

Explanation:
The customer wants to deploy 12 FortiAP 431F devices on a high density conference center, but they do not have any PoE switches to connect them to. They want to be able to run them at full power while having network redundancy. PoE switches are switches that can provide both data and power to connected devices over Ethernet cables, eliminating the need for separate power adapters or outlets. PoE switches are useful for deploying devices such as wireless access points, IP cameras, and VoIP phones in locations where power outlets are scarce or inconvenient. The FortiAP 431F is a wireless access point that supports PoE+ (IEEE 802.3at) standard, which can deliver up to 30W of power per port. The FortiAP 431F has a maximum power consumption of 25W when running at full power. Therefore, to run 12 FortiAP 431F devices at full power, the customer needs PoE switches that can provide at least 300W of total PoE power budget (25W x 12). The customer also needs network redundancy, which means that they need at least two PoE switches to connect the FortiAP devices in case one switch fails or loses power. From the FortiSwitch models and sample retail prices shown in the exhibit, the build of materials that has the lowest cost while fulfilling the customer's requirements is 2x FortiSwitch 248E-FPOE. The FortiSwitch 248E-FPOE is a PoE switch that has 48 GE ports with PoE+ capability and a total PoE power budget of 370W. It also has 4x 10 GE SFP+ uplink ports for high-speed connectivity. The sample retail price of the FortiSwitch 248E-FPOE is $1,995, which means that two units will cost $3,990. This is the lowest cost among the other options that can meet the customer's requirements. Option A is incorrect because the FortiSwitch 248EFPOE is a non-PoE switch that has no PoE capability or power budget. It cannot provide power to the FortiAP devices over Ethernet cables. Option B is incorrect because the FortiSwitch 224E-POE is a PoE switch that has only 24 GE ports with PoE+ capability and a total PoE power budget of 185W. It cannot provide enough ports or power to run 12 FortiAP devices at full power. Option D is incorrect because the FortiSwitch 124E-FPOE is a PoE switch that has only 24 GE ports with PoE+ capability and a total PoE power budget of 185W. It cannot provide enough ports or power to run 12 FortiAP devices at full power. Reference: https://www.fortinet.com/content/dam/fortinet/assets/data-sheets/FortiSwitch_Secure_Access_Series.pdf https://www.fortinet.com/content/dam/fortinet/assets/data-sheets/FortiAP_400_Series.pdf

NEW QUESTION # 103
Refer to the exhibits.

The exhibit shows a FortiGate model device that will be used for zero touch provisioning and a CLI Template.

To facilitate a more efficient roll out of FortiGate devices, you are tasked with using meta fields with the CLI Template to configure the DHCP server on the "office1" FortiGate.
Given this scenario, what would be the output of the config ip-range section on the CLI Template?

Answer: A

NEW QUESTION # 104
Refer to the exhibits.

A customer has deployed a FortiGate with iBGP and eBGP routing enabled. HQ is receiving routes over eBGP from ISP 2; however, only certain routes are showing up in the routing table-Assume that BGP is working perfectly and that the only possible modifications to the routing table are solely due to the prefix list that is applied on HQ.
Given the exhibits, which two routes will be active in the routing table on the HQ firewall? (Choose two.)

A. 172.16.204.128/25
B. 172.16.204.64/27
C. 172,620,64,27
D. 172.16.201.96/29

Answer: A,B

Explanation:
The prefix list in the exhibit is configured to match prefixes that are either in the 172.16.204.0/24 subnet or in the 172.62.0.0/16 subnet. The routes that match these prefixes will be active in the routing table on the HQ firewall.
The routes that match the following prefixes will not be active in the routing table:
172.16.201.96/29
172.62.0.64/27
These routes do not match the criteria set by the prefix list.
References:
Prefix lists | FortiGate / FortiOS 7.4.0 - Fortinet Document Library
Configuring BGP | FortiGate / FortiOS 7.4.0 - Fortinet Document Library

NEW QUESTION # 105
Refer to the exhibit showing a firewall policy configuration.

To prevent unauthorized access of their cloud assets, an administrator wants to enforce authentication on firewall policy ID 1.
What change does the administrator need to make?

A. Option A
B. Option D
C. Option B
D. Option C

Answer: A

Explanation:
https://docs.fortinet.com/document/fortigate/6.2.0/new-features/238665/authentication-policy-extensions

NEW QUESTION # 106
Refer to the exhibit.

You are operating an internal network with multiple OSPF routers on the same LAN segment. FGT_3 needs to be added to the OSPF network and has the configuration shown in the exhibit. FGT_3 is not establishing any OSPF connection.
What needs to be changed to the configuration to make sure FGT_3 will establish OSPF neighbors without affecting the DR/BDR election?

Answer: C

Explanation:
The OSPF configuration shown in the exhibit is using the default priority value of 1 for the interface port1. This means that FGT_3 will participate in the DR/BDR election process with the other OSPF routers on the same LAN segment. However, this is not desirable because FGT_3 is a new device that needs to be added to the OSPF network without affecting the existing DR/BDR election. Therefore, to make sure FGT_3 will establish OSPF neighbors without affecting the DR/BDR election, the priority value of the interface port1 should be changed to 0. This will prevent FGT_3 from becoming a DR or BDR and allow it to form OSPF adjacencies with the current DR and BDR. Option B shows the correct configuration that changes the priority value to 0. Option A is incorrect because it does not change the priority value. Option C is incorrect because it changes the network type to point-to-point, which is not suitable for a LAN segment with multiple OSPF routers. Option D is incorrect because it changes the area ID to 0.0.0.1, which does not match the area ID of the other OSPF routers on the same LAN segment. References: https://docs.fortinet.com/document/fortigate/7.0.0/administration-guide/358640/basic-ospf-example

NEW QUESTION # 107
......

It may be a contradiction of the problem, we hope to be able to spend less time and energy to take into account the test NSE8_812 certification, but the qualification examination of the learning process is very wasted energy, so how to achieve the balance? The NSE8_812 Exam Prep can help you make it. With the high-effective NSE8_812 exam questions, we can claim that you can attend the exam and pass it after you focus on them for 20 to 30 hours.

Valid NSE8_812 Exam Prep: https://www.validvce.com/NSE8_812-exam-collection.html

Report this page

NSE8_812 STUDY PLAN, VALID NSE8_812 EXAM PREP

NSE8_812 Study Plan, Valid NSE8_812 Exam Prep